DS2400N
2
2 INTRODUCTION
2.1 PRODUCT DESCRIPTION
The DS2400N laser scanner satisfies the most advanced needs of a wide range of
users. It has been developed focusing on the realistic requirements of its target
market. The outstanding result is an extremely compact, cost-effective and easy to
use industrial scanner.
Standard
Application Program
A standard application program is factory-loaded onto the
DS2400N. This program controls barcode reading, serial port
interfacing, data formatting and many other operating and
control parameters.
It is completely configurable from a host computer through
the Genius™ utility program provided on CD-ROM with the
scanner, or via the serial interface (Genius™ based Host
Mode Programming).
Custom Application
Programs
If the Standard Application Program does not meet your
requirements, please contact your local Datalogic distributor.
Some of the main features of DS2400N are listed below:
• ACB (Advanced Code Builder)
• small dimensions and light weight
• software programmable scanning speed on all models
• linear and raster versions
• completely configurable via serial interface (Genius™)
• 3 serial communication interfaces
• supply voltage from 10 to 30 Vdc
• reads all popular codes
• test mode to verify the reading features and exact positioning of the scanner
without the need for external tools
• programmable in 4 different operating modes to suit the most various barcode
reading system requirements
• code verifier
The DS2400N uses a solid state laser diode as a light source; the light emitted has a
wavelength between 630 and 680 nm. Refer to the section “Safety precautions” at
the beginning of this manual for information on laser safety.
16
To Next Page
Loading...
Need help?
General
Weight and Dimensions
