EasyManuals Logo

Datalogic Gryphon I GBT4400 User Manual

Datalogic Gryphon I GBT4400
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
Enter/Exit Programming Mode Reading Parameters
102
Gryphon™ I GD44XX
/
GBT4400/GM440X
Stand Illumination Control
Controls the illumination status while the reading mode is stand mode and the reader is
attempting to detect objects.
Motion Still Timeout
Motion Still Timeout specifies the waiting time after which no motions is detected. When no
motion is detected for period of time longer than the set Motion Still Timeout period, the
scanner assumes it is in a motionless condition. The selectable setting are from 500 to 25,500
milliseconds in 100 millisecond increments. The default is 2 seconds. This option relates to
such features and the Aimer On timing and Stand Mode Object Sense scanning with respect to
motion. See page 288 in "References" for detailed information on setting this feature.
Stand Illumination Control = OFF
Stand Illumination Control = ON
Stand Illumination Control = Dim
DEFAULT
$CSMIL00(CR)
$CSMIL01(CR)
$CSMIL02(CR)
Select Motion Still Timeout Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
a
t left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad representing your
desired character(s). End by scanning the ENTER/EXIT
ba
r code again.
Make a mistake? Scan the CANCEL bar code to abort
and not
save the entry string. You can then start again at
the beginning.
CANCEL
$CMOTO/r
~
DEFAULT
14 = Motion Still Timeout for 2 seconds

Table of Contents

Other manuals for Datalogic Gryphon I GBT4400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Gryphon I GBT4400 and is the answer not in the manual?

Datalogic Gryphon I GBT4400 Specifications

General IconGeneral
Wavelength650 nm
Scanner type2D
Yaw reading angle-40 - 40 °
Tilt reading angle0 - 360 °
Light levels (direct sunlight)0 - 100000 lx
Input voltage4.5 - 14.0 V
Battery capacity2100 mAh
Number of reads per charge60000
BluetoothYes
Dimensions (WxDxH)71 x 100 x 181 mm
CertificationChina RoHS, EU RoHS, IEC 60825 Class 2
Product colorBlack
LED indicatorsCharging, Power
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Weight245 g

Related product manuals