Datalogic Gryphon I GBT4400 User Manual

Product Reference Guide 301
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for featu
re descriptions and programming bar codes for each
parameter. A column has also been provided for recording of
your preferred default settings for
these same configurable features.
Table 54. Standard Defaults
Parameter Default Your Setting
Page
Nu
mber
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 39
USB Suspend Mode
Disable 39
RS-232 ONLY
Baud Rate
9600 42
Data Bits
8 Data Bits 43
Stop Bits
1 Stop Bit 43
Parity
None 44
Handshaking Control
RTS 45
RS-232/USB-Com
Intercharacter Delay
No Delay 47
Beep On ASCII BEL
Disable 47
Beep On Not on File
Enable 48
ACK NAK Options
Disable 49
ACK Character
‘ACK’ 50
NAK Character
‘NAK’ 50
ACK NAK Timeout Value
200 ms 51
ACK NAK Retry Count
3 Retries 51
ACK NAK Error Handling
Ignore Errors Detected 52
Indicate Transmission Failure
Enable 52

Datalogic Gryphon I GBT4400 Specifications

General

Wavelength	650 nm
Scanner type	2D
Yaw reading angle	-40 - 40 °
Tilt reading angle	0 - 360 °
Light levels (direct sunlight)	0 - 100000 lx
Input voltage	4.5 - 14.0 V
Battery capacity	2100 mAh
Number of reads per charge	60000
Bluetooth	Yes
Dimensions (WxDxH)	71 x 100 x 181 mm
Certification	China RoHS, EU RoHS, IEC 60825 Class 2
Product color	Black
LED indicators	Charging, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	245 g