Datalogic Gryphon I GBT4400 User Manual

Product Reference Guide 89
READING PARAMETERS
DOUBLE READ TIMEOUT on page 90 SCANNING ACTIVE TIME on page 101
LED AND BEEPER INDICATORS on page 92 STAND ILLUMINATION CONTROL on page 102
POWER ON ALERT on page 92 FLASH ON TIME on page 103
GOOD READ: WHEN TO INDICATE on page 92 FLASH OFF TIME on page 103
GOOD READ BEEP TYPE on page 93 AIMING POINTER on page 104
GOOD READ BEEP FREQUENCY on page 93 AIMING DURATION TIMER on page 104
GOOD READ BEEP LENGTH on page 94 GREEN SPOT DURATION on page 105
GOOD READ BEEP VOLUME on page 95 MOBILE PHONE MODE on page 105
GOOD READ LED DURATION on page 96 PARTIAL LABEL READING CONTROL on page 106
SCAN MODE on page 97 DECODE NEGATIVE IMAGE on page 106
STAND MODE INDICATION on page 98 IMAGE CAPTURE on page 107
STAND OPERATION on page 99 MULTIPLE LABELS PER FRAME on page 107
PICK MODE on page 100
MULTIPLE LABELS ORDERING BY CODE SYM-
BOLOGY on page 108
STAND MODE SENSITIVITY on page 100
MULTIPLE LABELS ORDERING BY CODE LENGTH
on page 108
STAND MODE ILLUMINATION OFF TIME on
page 101

Datalogic Gryphon I GBT4400 Specifications

General

Wavelength	650 nm
Scanner type	2D
Yaw reading angle	-40 - 40 °
Tilt reading angle	0 - 360 °
Light levels (direct sunlight)	0 - 100000 lx
Input voltage	4.5 - 14.0 V
Battery capacity	2100 mAh
Number of reads per charge	60000
Bluetooth	Yes
Dimensions (WxDxH)	71 x 100 x 181 mm
Certification	China RoHS, EU RoHS, IEC 60825 Class 2
Product color	Black
LED indicators	Charging, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	245 g