EasyManuals Logo

Datalogic Gryphon I GBT4400 User Manual

Datalogic Gryphon I GBT4400
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #266 background imageLoading...
Page #266 background image
References
264
Gryphon™ I GD44XX
/
GBT4400/GM440X
Intercode Delay
Specifies the delay between labels transmitted to the host for this interface. The selectable range
for this feature is from 0 to 99 seconds.
Follow these instructions to set this feature:
1. Determine the desired setting.
2. Pad the number with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 =
20
, etc
3. Go to page 61 and scan the ENTER/EXIT PROGRAMMING MODE bar code to enter
Programming Mode.
4. Scan the bar code: SELECT INTERCODE DELAY SETTING.
5. Scan the appropriate two digits from the keypad in Appendix D, Keypad, that represent
the duration which was determined in the steps above. You will hear a two-beep indica-
tion after the last character.
6. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Programming
Mo
de.
This completes the procedure. See Tabl e 34 for some examples of how to set this feature.
Table 34. Wedge Intercode Delay Examples
If you make a mistake before the last character, scan the CANCEL bar code
to abort and not save the entry string. You can then start again at the
beginning.
STEP ACTION EXAMPLES
1 Desired Setting
No Delay 5 Seconds 60 Seconds 99 Seconds
2 Pad with leading zero(es)
00 05 60 99
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT INTERCODE DELAY SETTING
5
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘5’ ‘6’ and ‘0’ ‘9’ AND ‘9’
6 Scan ENTER/EXIT PROGRAMMING MODE

Table of Contents

Other manuals for Datalogic Gryphon I GBT4400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Gryphon I GBT4400 and is the answer not in the manual?

Datalogic Gryphon I GBT4400 Specifications

General IconGeneral
Wavelength650 nm
Scanner type2D
Yaw reading angle-40 - 40 °
Tilt reading angle0 - 360 °
Light levels (direct sunlight)0 - 100000 lx
Input voltage4.5 - 14.0 V
Battery capacity2100 mAh
Number of reads per charge60000
BluetoothYes
Dimensions (WxDxH)71 x 100 x 181 mm
CertificationChina RoHS, EU RoHS, IEC 60825 Class 2
Product colorBlack
LED indicatorsCharging, Power
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Weight and Dimensions IconWeight and Dimensions
Weight245 g

Related product manuals