Datalogic Gryphon I GBT4400

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 97
SCANNING FEATURES
Scan Mode
Selects the reader’s scan operating mode. See page 277 in “References” for descriptions.
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
$CSNRM00(CR)
DEFAULT
$CSNRM01(CR)
$CSNRM
$CSNRM03(CR
$CSNRM04(CR)
$CSNRM05(CR
Options concerning Stand Mode behavior are available at the following
feature,
Stand Operation .