Datalogic Gryphon I GBT4400

Enter/Exit Programming Mode Code 39
134 Gryphon™ I GD44XX / GBT4400/GM440X
Code 39 Start/Stop Character Transmission
Enable this option to enable/disable transmission of Code 39 start and stop characters.
Code 39 Full ASCII
Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters.
Code 39 Start/Stop Character Transmission =
Don’t Transmit
Code 39 Start/Stop Character Transmission = Transmit
DEFAULT
$CC3SS00(CR)
$CC3SS01(CR)
Code 39 Full ASCII = Disable
Code 39 Full ASCII = Enable
DEFAULT
$CC3FA00(CR)
$CC3FA01(CR)