Datalogic Gryphon I GBT4400 - Optional GS1-128 Add-On Timer

Add-Ons Enter/Exit Programming Mode
Product Reference Guide 129
Optional GS1-128 Add-On Timer
This option sets the timer expiration value to read the added part after reading the linear EAN/
UPC part. For UPC/EAN add-ons other than those of that type, see "Optional Add-On
Timer" on page 126.
Optional GS1-128 Add-On Timer = Disable
Optional GS1-128 Add-On Timer = 10ms
Optional GS1-128 Add-On Timer = 20ms
Optional GS1-128 Add-On Timer = 30ms
Optional GS1-128 Add-On Timer = 40ms
Optional GS1-128 Add-On Timer = 50ms
DEFAULT
$CADUT00(CR)
$CADUT01(CR)
$CADUT02(CR)
$CADUT03(CR)
$CADUT04(CR)
$CADUT05(CR)