Datalogic Gryphon I GBT4400

Enter/Exit Programming Mode UPC-E
114 Gryphon™ I GD44XX / GBT4400/GM440X
UPC-A 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a base
label of this symbology is decoded.
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
EAN-13 2D Component =
Disable (2D component not required)
EAN-13 2D Component =
2D c
omponent must be decoded
DEFAULT
$CAB2D00(CR)
$CAB2D01(CR)
UPC-E = Disable
UPC-E = Enable
$CEBEN00(CR)
$CEBEN01(CR)
DEFAULT