Datalogic Gryphon I GBT4400 - Code 39; Code 39 Check Character Calculation; Code 39 Enable;Disable

Enter/Exit Programming Mode Code 39
132 Gryphon™ I GD44XX / GBT4400/GM440X
CODE 39
The following options apply to the Code 39 symbology.
Code 39 Enable/Disable
Code 39 Check Character Calculation
Enable this option to enables/disables calculation and verification of an optional Code 39 check
character. When disabled, any check character in the label is treated as a data character
Code 39 = Disable
Code 39 = Enable
$CC3EN00(CR)
$CC3EN01(CR)
DEFAULT
Code 39 Check Character Calculation = Don’t Calculate
Code 39 Check Character Calculation =
Calculate Std Check
Code 39 Check Character Calculation =
C
alculate Mod 7 Check
$CC3CC00(CR)
$CC3CC01(CR)
DEFAULT
$CC3CC02(CR)