Datalogic Gryphon I GBT4400 User Manual

Enter/Exit Programming Mode USB-OEM Interface
66 Gryphon™ I GD44XX / GBT4400/GM440X
USB-OEM Device Usage
The USB-OEM protocol allows for the reader to be identified as one of two different types of bar code scanners.
Depending on what other scanners you may already have connected to a USB-OEM POS, you may need to change
this setting to enable all devices to communicate.
Options are:
• Table Top Scanner
• Handheld Scanner
Interface Options
This feature provides for an interface-specific control mechanism.
It may be necessary to switch device usage when connecting two readers/scanners of the same
type to a POS system.
USB-OEM Device Usage = Table Top Scanner
USB-OEM Device Usage = Handheld Scanner
Obey Scanner Configuration Host Commands
Ignore Scanner Configuration Host Commands
$CIBUT00(CR)
$CIBUT01(CR)
DEFAULT
$CIFO101(CR)
$CIFO102(CR)
DEFAULT

Datalogic Gryphon I GBT4400 Specifications

General

Wavelength	650 nm
Scanner type	2D
Yaw reading angle	-40 - 40 °
Tilt reading angle	0 - 360 °
Light levels (direct sunlight)	0 - 100000 lx
Input voltage	4.5 - 14.0 V
Battery capacity	2100 mAh
Number of reads per charge	60000
Bluetooth	Yes
Dimensions (WxDxH)	71 x 100 x 181 mm
Certification	China RoHS, EU RoHS, IEC 60825 Class 2
Product color	Black
LED indicators	Charging, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	245 g