Datalogic Gryphon I GBT4400

Enter/Exit Programming Mode Code EAN/UPC
112 Gryphon™ I GD44XX / GBT4400/GM440X
UPC-A
The following options apply to the UPC-A symbology.
UPC-A Enable/Disable
When disabled, the reader will not read UPC-A bar codes.
UPC-A Check Character Transmission
Enable this option to transmit the check character along with UPC-A bar code data.
UPC-A = Disable
UPC-A = Enable
$CABEN00(CR)
$CABEN01(CR)
DEFAULT
UPC-A Check Character Transmission = Don’t Send
UPC-A Check Character Transmission = Send
$CABCT00(CR)
$CABCT01(CR)
DEFAULT