Datalogic Gryphon I GBT4400 - ACK NAK Options

RS-232/USB-Com Interfaces Enter/Exit Programming Mode
Product Reference Guide 49
ACK NAK Options
This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol. 
See page 256 for more information.
ACK/NAK Protocol = Disable ACK/NAK
ACK/NAK Protocol = Enable for label transmission
ACK/NAK Protocol = Enable for host-command
ac
knowledge
ACK/NAK Protocol = Enable for label transmission and
ho
st-command acknowledge
DEFAULT
$CR2AE00(CR)
$CR2AE01(CR)
$CR2AE02(CR)
$CR2AE03(CR)