Datalogic Gryphon I GBT4400 User Manual

Wireless Beeper Features Enter/Exit Programming Mode
Product Reference Guide 237
Docking Beep
Enables/disables a beep indication when the handheld is placed in the Base Station.
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three per second)
when the handheld goes out of range. This is especially useful in instances where the reader
might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station. If the
reader is
asleep or disconnected from the Base Station, there is no way for it to know where it is relative
to the Base Station because communication is not active between the devices.
Docking Beep = Disable
Docking Beep = Enable
$CBTCB00(CR)
$CBTCB01(CR)
DEFAULT
Leash Alarm = Disabled
Leash Alarm = 1 Second
Leash Alarm = 2 Seconds
DEFAULT
$CBTLB00(CR)
$CBTLB01(CR)
$CBTLB02(CR)

Datalogic Gryphon I GBT4400 Specifications

General

Wavelength	650 nm
Scanner type	2D
Yaw reading angle	-40 - 40 °
Tilt reading angle	0 - 360 °
Light levels (direct sunlight)	0 - 100000 lx
Input voltage	4.5 - 14.0 V
Battery capacity	2100 mAh
Number of reads per charge	60000
Bluetooth	Yes
Dimensions (WxDxH)	71 x 100 x 181 mm
Certification	China RoHS, EU RoHS, IEC 60825 Class 2
Product color	Black
LED indicators	Charging, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	245 g