Datalogic Gryphon I GBT4400 User Manual

Enter/Exit Programming Mode Reading Parameters
106 Gryphon™ I GD44XX / GBT4400/GM440X
Partial Label Reading Control
Enable/Disable the option to ignore partial labels to be read within the boundary of the field of
view.
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies. When this feature is
enabled, you will be unable to read normally-printed labels or programming labels in this
manual. Scan the “Disable” bar code below to return the scanner to its default for this feature.
To set the reader to decode only 2D codes, go to 2D Normal/Inverse Symbol Control" on page
203.
For additional options, see the A
laddin configuration application.
Partial Label Reading Control = Disable
Partial Label Reading Control = Enable
IPPL00
IPPL01
Unlike some programming features and options, Decode Negative Image selec-
tions require that you scan only one programming bar code label. DO NOT scan
an ENTER
/EXIT bar code prior to scanning a Decode Negative Image bar code.
CAUTION
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Decode Negative Image = Disable
Decode Negative Image = Enable
$P,CIPVR00,P(C
R)
DEFAULT
$P,CIPVR01,P(CR)

Datalogic Gryphon I GBT4400 Specifications

General

Wavelength	650 nm
Scanner type	2D
Yaw reading angle	-40 - 40 °
Tilt reading angle	0 - 360 °
Light levels (direct sunlight)	0 - 100000 lx
Input voltage	4.5 - 14.0 V
Battery capacity	2100 mAh
Number of reads per charge	60000
Bluetooth	Yes
Dimensions (WxDxH)	71 x 100 x 181 mm
Certification	China RoHS, EU RoHS, IEC 60825 Class 2
Product color	Black
LED indicators	Charging, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Weight	245 g