Datalogic Gryphon I GBT4400

Maxicode Enter/Exit Programming Mode
Product Reference Guide 213
Maxicode
Maxicode Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
Maxicode Primary Message Transmission
Enables/disables the transmission of only the Primary Message when the Secondary
Message is not readable.
Maxicode = Disable
Maxicode = Enable
DEFAULT
$CMXEN00(CR)
$CMXEN01(CR)
Maxicode Primary Message Transmission = Disable
Maxicode Primary Message Transmission = Enable
DEFAULT
$CMXPT00(CR)
$CMXPT01(CR)