Deep Sea Electronics Plc DSE8810 Software Manual

Edit Configuration
97
The following screen shot shows the configuration when set for Temperature Sensor. When set to other
Sensor Type, consult the relevant manual section for details (Digital inputs, Oil Pressure input etc)
Click to edit the
‘sensor curve’. See
section entitled
Editing the sensor
curve
.
Select the
sensor type
Click and drag to
change the settings
Type the value or click the up and
down arrows to change the settings
Click to enable or
disable the alarms.
The relevant values
below will appear
greyed out if the
alarm is disabled.
Type the text you want to appear on the
screen when the alarm is triggered.
Select the type of
alarm required.
For details of these,
see the section
entitled Alarm
Types elsewhere in
this document.

Deep Sea Electronics Plc DSE8810 Specifications

General

Brand	Deep Sea Electronics Plc
Model	DSE8810
Category	Controller
Language	English