Deif Multi-line 2 User Manual

AGC Designer’s Reference Handbook
DEIF A/S Page 116 of 168
Counters
Counters for various values are included, and some of these can be adjusted if necessary, for
instance if the unit is installed on an existing gen-set or a new circuit breaker has been installed.
The table shows the adjustable values and their function:
Description Function Comment
6081 Running time Offset adjustment of the total running
hours counter.
Counting when the running
feedback is present.
6082 GB operations Offset adjustment of the number of
generator breaker operations.
Counting at each GB close
command.
6083 MB operations Offset adjustment of the number of
mains breaker operations.
Counting at each MB close
command.
6084 kWh reset Resets the kWh counter. Automatically resets to OFF
after the reset. The reset
function cannot be left active.
6085 Attempts Offset adjustment of the number of
start attempts.
Counting at each start
attempt.
6086 Running time FP The running hour counter for the fire
pump operation can be reset in this
menu.
The running hour counter is
shown in the display.
The entire log can be saved in Excel format and in that particular programme.

Deif Multi-line 2 Specifications

General

Brand	Deif
Model	Multi-line 2
Category	Controller
Language	English