Deif Multi-line 2 User Manual

AGC Designer’s Reference Handbook
DEIF A/S Page 7 of 168
3. General product information
This chapter will deal with the unit in general and its place in the DEIF product range.
Introduction
The AGC is part of the DEIF Multi-line 2 product family. Multi-line 2 is a complete range of multi-
function generator protection and control products integrating all the functions you need into one
compact and attractive solution.
The concept of the AGC is to offer a cost-effective solution to gen-set builders, who need a
flexible generator protection and control unit for medium to large gen-set applications. Being part
of the Multi-line product family the standard functions can be supplemented with a variety of
optional functions.
Type of product
The Automatic Gen-set Controller is a micro-processor based control unit containing all
necessary functions for protection and control of a gen-set.
It contains all necessary 3-phase measuring circuits, and all values and alarms are presented on
the LCD display
Options
The Multi-line 2 product range consists of different basic versions which can be supplemented
with the flexible options needed to provide the optimum solution. The options cover e.g. various
protections for generator, busbar and mains, voltage/VAr/PF control, various outputs, power
management, serial communication, additional operator display, etc.
PC utility software warning
It is possible to remote control the gen-set from the PC utility software M-
Vision or the Graphical Display Unit (GDU) by use of a modem. To avoid
personal injury make sure that it is safe to remote control the gen-set.
A full options list is included in the data sheet, document no. 4921240257.

Deif Multi-line 2 Specifications

General

Brand	Deif
Model	Multi-line 2
Category	Controller
Language	English