AGC Designer’s Reference Handbook
DEIF A/S Page 5 of 168
Display unit and menu structure
This chapter deals with the display unit including the push-button and LED functions. In addition,
the unit menu structure will be presented. Furthermore, the selection of unit mode and password
will be illustrated.
Additional functions
This chapter describes the additional functions of the unit.
PI-controller
This chapter offers information about the PI-controller in the form of principle drawings and
descriptions.
Synchronising
This chapter has detailed information about the unit’s dynamic and static synchronisation.
Procedure for parameter setup
This chapter deals with the procedure to be followed, when the parameters are set up or changed.
By use of various illustrations this chapter will guide the user through the procedure for parameter
setup step by step.
Parameter list
This chapter includes a complete standard parameter list for setup. Therefore, this chapter is to be
used for reference, when information about specific parameters is needed.