6.
7.
Changing the Clock Mode
You can set your printer to display the current time using either the 12-hour or the 24-hour format.
Press Scroll ( or ) to highlight Setup and then press Select ( ).1.
Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).2.
Press Scroll ( or ) to highlight Clock Mode and then press Select ( ).3.
The printer displays the Clock mode that is currently set.
Press Scroll ( or ) to select the other mode and then press Select ( ) to save the
selection.
4.
Press Cancel ( ) to return to the Standby mode.5.
Setting Sounds
Speaker, Ringer, Button and Alarm Sounds
Press Scroll ( or ) to highlight Setup and then press Select ( ).1.
Press Scroll ( or ) to highlight Machine Setup and then press Select ( ).2.
Press Scroll ( or ) to highlight Sound/Volume and then press Select ( ).3.
Press Scroll ( or ) to scroll through the options. Press Select ( ) when you see the
sound option you want.
4.
Press Scroll ( or ) to display the status or loudness you want for the option you have selected.5.
For the ringer volume, you can select from Off , Low , Med and High . Setting Off means that the
ringer turns off. The printer works normally even if the ringer is turned off.
Press Select ( ) to save the selection.6.
If necessary, repeat steps 4 through 6 .7.
8.
To Next Page
Loading...
