Dell 2335dn - Selecting an Output Location

Envelopes
100% Cotton
Content Maximum
Weight- 24 lb
Sulfite, wood-
free or up to 100%
cotton bonds
-
75-90 g/m
2
(20-24 lb)
Grain short is preferred for papers over 135 g/m
2
a.
Thickness: 0.1 to 0.15 mmb.
Selecting an Output Location
The printer has two output locations; the output tray (face down) and the rear door (face up).
To use the output tray, ensure that the rear door is closed. To use the rear door, open it.
NOTE: If paper coming out of the output tray has problems, such as excessive curl, try printing to the
rear door.
NOTE: To avoid paper jams, do not open or close the rear door while the printer is printing.
Printing to the Output Tray (Face down)
The output tray collects printed paper face-down, in the correct order. The tray should be used for most print
jobs.
Downloaded from ManualsPrinter.com Manuals