9.
If you want to edit the scanned image, use the toolbar. For further details about editing an image, see
"Using the Image Editor".
When you are finished, click Save on the toolbar.10.
Select the file directory where you want to save the image and enter the file name.11.
Click Save.12.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later scanning.
To save a new Job Type setting:
Change the options from the Scanner Properties window.1.
Click Save As.2.
Enter the name for your setting.3.
Click OK.4.
Your setting is added to the Saved Settings drop-down list.
To save a Job Type setting for the next scan job:
Select the setting you want to use from the Job Type drop-down list.1.
Click Save.2.
To Next Page
Loading...
