Data
Write Fail
Check USB key
Storing to the USB memory
key failed.
Check the available USB
memory space.
Non USB mass storage device,
such as USB mouse, is connected
with USB memory port.
Remove the non USB mass
storage device from USB memory
port.
The loaded document has
jammed in the DADF.
Clear the document jam. See
"Clearing Jams in the DADF".
The front cover is not securely
latched.
Close the cover until it locks
into place.
Paper has jammed during
duplex printing.
Clear the jam. See "Duplex
Jam 0".
Remove
paper &
Open/Close
Front Door
Paper has jammed during
duplex printing.
Clear the jam. See "Duplex
Jam 1".
You entered an unavailable
item.
Enter the correct item again.
The selected file format is not
supported.
Enter the correct item again.
The fuser door is not securely
latched.
Open the rear door and close
the fuser door until it locks into
place. For the location of the fuser
door, see "Paper Exit Jam".
Open
Rear Door
Close Fuser
Door
Fuser
Error
Fuser Not
Installed Check
Rear Door
There is a problem in the
fuser unit.
Unplug the power cord and
plug it back in. If the problem
persists, please call for service.
You have tried to select a
group location number where only a
single location number can be used,
such as when adding locations for a
broadcasting operation.
Use a speed dial number or
dial the number manually using the
number keypad.
USB hub device is connected
with USB memory port.
Remove the USB hub device
from USB memory port.
The paper in the paper tray
Load paper in the paper tray.
Downloaded from ManualsPrinter.com Manuals