Acceptable print materials are plain paper with sizes ranging from 3.0 by 5.0 in. (76 by 127 mm) to Legal,
8.5 by 14 in. (216 by 356 mm), the largest size acceptable, and weighing between 16 lb and 43 lb.
NOTE: Always load only the print materials specified in the Specifications on "Paper Specifications" to
avoid paper jams and print quality problems.
NOTE: Flatten any curl on postcards, envelopes and labels before loading them into the MPF.
To use the MPF:
Open the MPF and unfold the paper support extension, as shown.1.
If you are using paper, flex or fan the edge of the paper stack to separate the pages before loading.2.
For transparencies, hold them by the edges and avoid touching the print side. Oils from your fingers
can cause print quality problems.
Load the print material with the side to be printed on facing up.3.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
