Delta Electronics AC Motor Drive VFD-VE Series - Page 113

Chapter 4 Parameters|
4-64 Revision August 2008, 03VE, SW V2.04
Settings Functions Descriptions
32
Middle torque bias (by
Pr.07-30)
The middle torque bias is according to the Pr.07-30 setting.
33
Low torque bias (by
Pr.07-31)
The low torque bias is according to the Pr.07-31 setting.
34
Enable multi-step
position control
When this function is enabled, the corresponding 15-step
speed for the multi-function inputs 1-4 will be 15 positions.
(Refer to Pr.04-15 to Pr.04-29)
Run
1
0
1
1
1
0
1
1
0
0
1
1
0
0
1
1
04-27 04-26
04-11
MI=d35
MI=d34
MI=d1
MI=d2
MI=d3
MI=d4
speed mode
speed mode
position mode
10-19
position
(Home)
multi-
position
1
3
multi-
position
12
12th step
speed
frequency
MI=4
Run
1
0
1
1
1
0
1
1
1
0
1
1
0
0
1
1
主速
04-12
04-27
04-26
MI=d34
MI=d35
MI=d1
MI=d2
MI=d3
speed mode
position mode
13th step
speed
frequency
multi-
position
13
multi-
position
12