EtherCAT Programming Guide Error Code Description
March, 2017 34-11
34
Code in DEC 18 Code in HEX 0x12
Name of error
code
ERR_ECAT_ENVIRONMENT_RECORD_DISABLE
Description
The function of the Autoconfig file is not working due to the system
configuration error.
Troubleshooting N/A
Code in DEC 19 Code in HEX 0x13
Name of error
code
ERR_ECAT_ENVIRONMENT_RECORD_NO_MATCH
Description
The hardware connection configuration saved by Autoconfig file does not
match the one for Fieldbus.
Troubleshooting
Communication for the hardware cannot be created. Please check if the
connection is normal.
Code in DEC 20 Code in HEX 0x14
Name of error
code
ERR_ECAT_ENVIRONMENT_RECORD_FILE_OPEN
Description Fail to open the Autoconfig file.
Troubleshooting Please check if the Autoconfig file is saved in the given directory.
Code in DEC 21 Code in HEX 0x15
Name of error
code
ERR_ECAT_ENVIRONMENT_RECORD_NOT_CREATE
Description
The Autoconfig file for saving the hardware connection configuration has not
been created.
Troubleshooting Please execute the initialization procedure correctly.
Code in DEC 23 Code in HEX 0x17
Name of error
code
ERR_ECAT_DEVICE_OPEN
Description The setting for initializing EtherCAT Master is in error.
Troubleshooting
An error has occurred when initializing EtherCAT Master. Please check if the
hardware connection is normal.
Code in DEC 24 Code in HEX 0x18
Name of error
code
ERR_ECAT_NO_DEVICE
To Next Page
Loading...
