User Manual for DEVO-12 Page 127 of 238
Left Aileron
Right Aileron
Connect to the output AILE in Receiver
Connect to the output ELEV in Receiver
1.3) 4 Aileron
If your model airplane is equipped two left aileron servos and two right aileron servos,
we recommend you to use 4-Aileron function.
Touch the navigation mark of Wing Type, and expand a dropdown menu with Normal,
Flaperon, DELTA, and 4-Aileron. Click 4-Aileron. Check the channel assignment by
touching Monitor (Refer to “3.19 Monitor”).
The left aileron servos should be connected to the outputs GERA and AUX3 in the
receiver, and the right aileron servos connected to AILE and GYRO in the receiver.
All the servos’ parameters can be adjusted, respectively.
2) V-TAIL
Touch the navigation mark of V-TAIL and expand a dropdown menu with Inhibit and
Active. Choose Active.
Below is the sketch map of V-tail servos’ assignment:
English Your language
Left empennage
Right empennage
Connect to the output ELEV in Receiver
To Next Page
Loading...
