Diamond DA 62 - Page 215

Normal Operating
Procedures
DA 62 AFM
c) GPS
1. Navigation source . . . . . . . . . . . . . . . . . . . . . select GPS using CDI button on
PFD
2. Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . load in FMS and ACTIVATE
3. Intercept heading . . . . . . . . . . . . . . . . . . . . . . establish in HDG or ROL mode (if
required)
4. Mode controller . . . . . . . . . . . . . . . . . . . . . . . select APR on mode controller
5. Green or white GPS annunciation . . . . . . . . . note on PFD
6. Vertical mode and reference . . . . . . . . . . . . . select on mode controller
END OF CHECKLIST
d) Back Course (BC)
1. Navigation source . . . . . . . . . . . . . . . . . . . . . select LOC using CDI button on
PFD
2. Course bearing pointer . . . . . . . . . . . . . . . . . . set to ILS front Course using course
knob
3. Intercept heading . . . . . . . . . . . . . . . . . . . . . . establish in HDG or ROL mode (if
required)
4. Mode controller . . . . . . . . . . . . . . . . . . . . . . . select NAV on mode controller
5. Green or white BC annunciation . . . . . . . . . . note on PFD
CONTINUED
Page 4A - 58 Rev. 0 11-Jan-2019 Doc. No. 11.01.05-E