Diamond DA20-C1 - Warnings, Cautions and Advisories

DA20-C1 Flight Manual
Supplement 13
Doc # DA202-C1 April 06, 2010 Page S13 - 11
3.5 WARNINGS, CAUTIONS, and Advisories
The following tables show the color and significance of the warning, caution, and
advisory messages which may appear on the G500 displays.
NOTE
The G500 cockpit reference guide and the G500 pilot's guide
contain detailed descriptions of the annunciator system and all
warnings, cautions and advisories.
WARNING annunciations - Red
Annunciation Pilot Action Cause
AIRSPEED FAIL Use Standby Airspeed Display system is not receiving
airspeed input from the air data
computer; accompanied by a red X
through the airspeed display.
ALTITUDE FAIL Use Standby Altitude. Display system is not receiving
altitude input from the air data
computer; accompanied by a red X
through the altimeter display.
VERT SPD FAIL Cross check instruments. Display system is not receiving
vertical speed input from the air data
computer; accompanied by a red X
through the vertical speed display.
HDG Use standby Magnetic
Compass or GPS track
information.
Display system is not receiving valid
heading input from the AHRS;
accompanied by a red X through the
digital heading display.
Red X Reference the data
source or alternate
equipment.
A red X through any display field,
indicates that display field is not
receiving data or is corrupted.
Revision 25 DOT Approved