Digi AnywhereUSB Plus

Interfaces Wide Area Networks (WANs)
AnywhereUSB® Plus User Guide
152
IPv4 DNS server(s) : 245.144.162.207, 245.144.162.208
IPv6 surelink : passing
IPv6 address : 11f6:4680:0d67:59d2:552b:3429:81a8:f1ea
IPv6 gateway : ff50:d95d:7e98:abe8:3030:9138:4f25:f51b
IPv6 MTU : 1500
TX bytes : 127941
RX bytes : 61026
Uptime : 10 hrs, 56 mins (39360s)
SIM
---
SIM Slot : 1
SIM Status : ready
IMSI : 61582122197895
ICCID : 26587628655003992180
SIM Provider : AT&T
4G
--
RSRQ : Good (-11.0 dB)
RSRP : Good (-93.0 dBm)
RSSI : Excellent (-64.0 dBm)
SNR : Good (6.4 dB)
>
Unlock a SIM card
A SIMcard can be locked if a user tries to set an invalid PINfor the SIMcard too many times. In
addition, some cellular carriers require a SIMPINto be added before the SIMcard can be used. If the
SIMcard is locked, the AnywhereUSB device cannot make a cellular connection.
Command line
To unlock a SIM card:
1. Log into the AnywhereUSB Plus command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the modem command to set a new PINfor the SIM card:
> modem puk unlock puk_code new_pin modem_name
>
For example, to unlock a SIMcard in the modem named modem with PUK code 12345678, and
set the new SIM PIN to 1234:
> modem puk unlock 12345678 1234 modem
>