Services Location information
AnywhereUSB® Plus User Guide
267
l
For Latitude, any integer between -90 and 90, with up to six decimal places.
l
For Longitude, any integer between -180 and 180, with up to six decimal
places.
d. Click gagain to add an additional point, and continue adding points to create the
desired polygon.
For example, to configure a square polygon around the Digi headquarters, configure a
polygon with four points:
This defines a square-shaped polygon equivalent to the following:
7. Define actions to be taken when the device's location triggers a geofence event:
n
To define actions that will be taken when the device enters the geofence, or is inside
the geofence when it boots:
a. Click to expand On entry.
b. (Optional) Enable Bootup action to configure the device to perform the On entry
actions if the device is inside the geofence when it boots.
To Next Page
Loading...
