Virtual Private Networks (VPN) IPsec
AnywhereUSB® Plus User Guide
598
1. Log into the AnywhereUSB Plus WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click g.
The new SCEP client configuration is displayed.
5. Click Enable to enable the SCEP client.
6. For Renewable Time, type the number of days that the certificate enrollment can be renewed,
prior to the request expiring. This value is configured on the SCEP server, and is used by the
AnywhereUSB Plus device to determine when to start attempting to auto-renew an existing
certificate. The default is 7.
7. (Optional) For CRL file name, type the filename of the Certificate Revocation List (CRL) from the
CA.
The CRL is stored on the AnywhereUSB Plus device in the /etc/config/scep_client/client_name
directory.
8. Click to expand SCEP server.
9. For FQDN, type the fully qualified domain name or IP address of the SCEP server.
10. For Password, type the challenge password as configured on the SCEP server.
To Next Page
Loading...
Need help?
General