Digi AnywhereUSB Plus User Manual

Virtual Private Networks (VPN) IPsec
AnywhereUSB® Plus User Guide
600
(config network scep_client scep_client_name)> server password challenge_
password
(config network scep_client scep_client_name)>
7. Set Distinguished Name attributes:
a. Set the Domain Component:
(config network scep_client scep_client_name)> distinguished_name dc
value
(config network scep_client scep_client_name)>
b. Set the two letter Country Code:
(config network scep_client scep_client_name)> distinguished_name c
value
(config network scep_client scep_client_name)>
c. Set the State or Province:
(config network scep_client scep_client_name)> distinguished_name st
value
(config network scep_clientscep_client_name )>
d. Set the Locality:
(config network scep_client scep_client_name)> distinguished_name l
value
(config network scep_client scep_client_name)>
e. Set the Organization:
(config network scep_client scep_client_name)> distinguished_name o
value
(config network scep_client scep_client_name)>
f. Set the Organizational Unit:
(config network scep_client scep_client_name)> distinguished_name ou
value
(config network scep_client scep_client_name)>
g. Set the Common Name:
(config network scep_client scep_client_name)> distinguished_name cn
value
(config network scep_client scep_client_name)>
8. Set the number of days that the certificate enrollment can be renewed, prior to the request
expiring. This value is configured on the SCEP server, and is used by the AnywhereUSB Plus
device to determine when to start attempting to auto-renew an existing certificate. The default
is 7.

Digi AnywhereUSB Plus Specifications

General

Brand	Digi
Model	AnywhereUSB Plus
Category	Switch
Language	English