Revision Date Description
H February
2021
Updated the Get Started section.
Updated the components list for all variants.
Updated Console port section.
Added information on how to define a static IP address.
Added information about client IDlength.
Added Cannot uninstall the Manager from the Windows Apps screen.
G December
2020
Release of Digi AnywhereUSB Plus firmware version 20.11:
n
Modem firmware update commands added to the Admin CLI.
n
Network bridging enhanced to use the MAC address of the first
active device listed in Network > Bridges > Bridge name >
Devices as the MAC address for the bridged interface.
n
IPsec enhancements:
l
Support for full IPsec IPv6 tunnels: IPv6-over-IPv4, or IPv4-
over-IPv6 tunnels.
l
IPsec tunnels are now treated like network interfaces, which
allows tunnels to be selected for routing and routing priority
and access control lists.
l
IPSec tunnels now wait for Surelink tests, if configured, to
pass prior to initiating outbound tunnels.
n
Policy-based routing enhancements:
l
Added a DSCP option to match the routing rule by the type of
DSCP field in the packet.
l
Added a Defaultroute option for matching policy-based
routes to the device's active default route.
n
Python pip support for installing external modules and libraries.
n
Link speed and duplex options added to Ethernet port
configuration.
n
ssh command added to Admin CLI.
n
Services > Ping responder allows you to control the interfaces
and firewall zones on which the DAL device will respond to ICMP
requests.
n
Enhanced policy-based routing:
l
Added a DSCP option to match the routing rule by the type of
DSCP field in the packet.
l
Added a Defaultroute option for matching policy-based
routes to the device's active default route.
n
Added a link to User Guide under the User menu in the Web UI.
Additional changes:
n
Updated latency graph information.
n
Added information for Always on top option.
AnywhereUSB® Plus User Guide
7
To Next Page
Loading...
Need help?
General