SM-300 Service Manual
10
data, shop name, etc.)
Indicator Z - TOTAL MODE (Clear sales data stored.)
Indicator X (Blink) - PASWORD SETTING MODE (Setting ENTRY PASSWORD
for S, X and Z modes.)
PRESET KEYS
To
* Call up Preset data such as PLU Data or Function Data in Reg. Mode.
* Enter Alphabetic data in Program Mode.
Note: The following Preset Keys are used in entering Alphabetic (Pole Type).
Move the
cursor.
Change the
entry to Right.
Move the
cursor.
Change the
entry to Left.
Code type
entered.
Insert Data. Switch Cap /
Lower case.
Change Font
size.
Delete the
Data.
2.3 Panel Layout
Bench Type
Pole Type And Hanging Type
There are fifteen different indicators on Display Panel as shown below.
1.
Î0Í
: Lights when scale is stable at the zero point
2.
NET
: Lights when tare subtraction in performed.
3.
P
: Lights when PRE-PACK Mode is selected.
4.
M
: Lights when MANUAL Mode is selected.
5.
AM
: Lights when the amount is displayed.
6.
CH
: Lights when the amount of change is being displayed.
To Next Page
Loading...
