Digi SM-300 - Data Backup and Transfer; System Configuration Settings

SM-300 Service Manual
40
4.2.4 Printing Position
To adjust the printing position when printing is out of alignment. The process only allows adjusting vertical
position only.
KEY TO PRESS OPERATION
At R mode.
0.000 0.00 0.00
0.000
KEY TO PRESS OPERATION
+
CALIBRATE THERMAL HEAD
OLD: 0 / NEW: 0
KEY TO PRESS OPERATION
Adjust upward.
OR
Adjust downward.
OR
Store new value and exit to R mode.
0.000 0.00 0.00
0.000