SM-300 Service Manual
92
11. REVISION RECORDS
Serial
no.
Date
Rev.
Status
Description of Changes
Software
Version
Remarks
001 18Jan 00 V1.99 Edition 1
002 Mar’02 01
Safety Precaution – Included Cautions
Continuous Page Number have been changed (e.g.
5–4) Stand for Chapter 5 Page 4
SM300 Service Manual 2
nd
Edition – Included
SM300 BS and SM300H
Page 1-1, 1-2 – SM300BS, SM300H information
added and Flash memory changed.
Page 2-8 – Hanging Information added
Page 3-2 – Hanging Information added
Page 4-2 – Adding Header for hardware testing
Page 5-3 to 5-7 – Hanging Information added
Page 7-1 to 7-5 – Updated
Page 9-1 to 9-8 – Updated
APPENDIX
Exploded View – Updated
Block Diagram – Updated
Circuit Diagram – Updated
Specification List – Updated
V2.47 Edition 2
003 Feb’03 02
Actual Display Layout as shown below
Page 4-4 & 4-5 – Show the TEST CONNECTOR at
the section, respectively.
Page 4-10 – New printer kit information added.
Page 5-2 – Interface Bracket Changed (Photos)
Page 5-2 – Whole Printer Kit (Drawer) Changed
(Photos)
Page 5-3 – Printer Thermal Head Changed (Photos)
Page 6-7 to 6-8 – Server IP Address information
added.
Page 6-9 – Subnet Mask information added
Page 6-13 – Wireless Configuration information
added.
Page 7-1 – WinDload ver2.10 information instead of
WinDload ver2.04
Page 7-5 – Country Selection add in before start
perform downloading.
Page 8-2 & 8-3 – RF Kit Interface Add On information
added (all models).
APPENDIX
1. Both Block Diagram & Circuit Diagram have
been removed
2. Add 20 New Specs in Customer Spec (Rezero
141)
3. Add 3 New Spec in W&M Spec (Rezero 142)
V14.84 Edition 3
004 Apr’03 03
[Tahoma Font] used in 4
th
Edition and above.
Most of the drawings shown in the SERVICE
MANUAL are replacing by scanned images.
V14.84 Edition 4
To Next Page
Loading...
