Digi SM-300 - Assembly and Disassembly; Bench and Pole Type Assembly; Display Board for Bench

SM-300 Service Manual
44
KEY TO PRESS OPERATION
Clear and Exit
OR
Exit without clear.
Exit to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
4.3.3 Clearing All Files
KEY TO PRESS OPERATION
+
Power Off the scale; hold both keys shown on left side and
Power On the scale. Clear Static RAM data and file initialize.
MEMORY CLEAR?
PRESS: C (YES) / T (NO)
KEY TO PRESS OPERATION
Process of initialization, then goes to segment check.
PLEASE WAIT…
KEY TO PRESS OPERATION
Go to segment check.
SM-300 VERSION 14.84
STAND ALONE