Digi SM-300 - RAM and Communication Port Testing

SM-300 Service Manual
25
3.2.3.2 Weight And Measurement Specification (Re-zero 142)
To change the setting of the Weight &Measurement SPEC if there is some SPEC need to alter.
(Please turn on the SPAN SWITCH when using this process)
KEY TO PRESS OPERATION
Go to Z mode and turn on the Span Switch.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
KEY TO PRESS OPERATION
+
At the W & M SPEC setting at SPEC 600.
SP600: WT ITEMS PC BASE
1>>1: 1KG BASE
KEY TO PRESS OPERATION
To
OR
+
OR
Select data.
Save data and increase SPEC No.
SP601: AUTO-ZERO FUNC
0>>0: NO AUTO-ZERO