Digi SM-300 - SIO Loop Back Test

SM-300 Service Manual
26
KEY TO PRESS OPERATION
Increase the SPEC number without saving data of the previous
SPEC number.
SP602: DISPLAY TYPE
0>>0: SINGLE DISP ROW
KEY TO PRESS OPERATION
Decrease the SPEC number without saving data of the
previous SPEC number.
SP601: AUTO-ZERO FUNC
0>>0: NO AUTO-ZERO
KEY TO PRESS OPERATION
To jump to desire SPEC number.
SP610: UP DP R.SHIFT
0>>0: NO RIGHT SHIFT
KEY TO PRESS OPERATION
To save.
Save SPEC setting and exit to R mode.
OR
No save.
Do not save SPEC setting and exit to R mode.
0.000 0.00 0.00
0.000
# REMARK: Please restart the scale every time after changing the SPEC.