Digi SM-300 - Peel Sensor Calibration

SM-300 Service Manual
34
KEY TO PRESS OPERATION
Escape to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
4.1.3 Internal Count
KEY TO PRESS OPERATION
Go to Z mode and turn on the Span Switch.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
KEY TO PRESS OPERATION
+
At Internal count mode.
INTERNAL COUNT MODE
0 10714
KEY TO PRESS OPERATION
Escape to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY