Digi SM-300 - ROM Checksum Test; Auto Generate PLU

SM-300 Service Manual
28
4. MAINTENANCE
4.1 Diagnostic
4.1.1 Changing Mode
KEY TO PRESS OPERATION
At R mode.
0.000 0.00 0.00
0.000
KEY TO PRESS OPERATION
Go to X mode.
X MODE: SELECT REPORT
X
USING PRESET KEY
KEY TO PRESS OPERATION
Go to S mode.
PLU PROGRAMMING
S
ENTER PLU # 0
KEY TO PRESS OPERATION
Go to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
Z