Digi SM-300 - Voltage Checkpoints; Memory Clearing; Clearing Data Files

SM-300 Service Manual
36
4.1.5 Thermal Head Usage
KEY TO PRESS OPERATION
Go to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
KEY TO PRESS OPERATION
+
Process to Thermal Head Usage mode.
The counter will jump with every 1000 printing.
Press [C] to clear the counter to 0.
ENABLE 1K THERMAL HEAD
USAGE COUNTER 12
KEY TO PRESS OPERATION
Counter clear.
ENABLE 1K THERMAL HEAD
USAGE COUNTER 0
KEY TO PRESS OPERATION
No clear the counter and escape to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY