Digi SM-300 - Firmware Management; WinDload v2.10 Software; Firmware Version Upgrade

SM-300 Service Manual
66
6.2.2.4 Subnet Mask
KEY TO PRESS OPERATION
Go to Z mode.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
Z
KEY TO PRESS OPERATION
+
Display default Subnet Mask.
SUBNET MASK
255255255000
KEY TO PRESS OPERATION
Key in Subnet Mask desired.
SCALE IP ADDRESS
255255255000
Z
KEY TO PRESS OPERATION
Save the address and escape to Z mode.
OR
Escape to Z mode without saving.
TO CLEAR DAILY TRANS
PRESS PRINT KEY
Z
REMARK: Please restart the scale every time after changing the SPEC.