Digi SM-300 - RS-485 Loop Back Test; Ethernet Test

SM-300 Service Manual
27
3.2.3.3 Scale Setting
Please check the preset key type for the self-service and hanging type scale. Choose the SCALE TYPE
according in the DEFAULT SPECIFICATION SETTING and also set the SPEC for the following:
SPEC 664 DENMARK SELF SERVICE TYPE
0 Inhibit 1 Allow
SPEC 672 KEYBOARD SELECTION
0 Normal keyboard 2 80 preset keys keyboard
1 100 preset keys keyboard
SPEC 673 HANGING SCALE
0 No 1 Yes
SPEC 688 SM500 SELF-SERVICE
0 No 1 Yes
# REMARK: After changing and saving the SPEC, please restart the scale.
SPEC 688 also can be use for SM300 Self-service. (Not only for SM500)