Digi SM-300 - Interface Main Board Removal; Printer Kit Components

SM-300 Service Manual
46
KEY TO PRESS OPERATION
+
Access to files transfer menu.
PLU FILES TO FL-1
KEY TO PRESS OPERATION
&
Press Preset key 7 & 8 to select the files type to transfer.
Then
1. PLU files to FL-1
2. Format files to FL-1
3. Other files to FL-1
4. All files to FL-1
FILES SAVE TO FL-1
KEY TO PRESS OPERATION
&
Press Preset key 7 & 8 to select the job.
Then
1. Files save to FL-1
2. Files read from FL-1
3. Verify files with FL-1
FILES SAVE TO FL-1