OPERATION
3-24 25257 Issue 3 November 2013
Rotation: Rotates field (0°, 90°, 180°, 270°).
Negative printing: To print white on colour (e.g. white on black).
Visible print: To make the field printable or not printable.
Press “Accept New Values” to confirm changes and to return to the “Field”
screen.
To set up or update the date and time: In the Service menu, select
Set-up>Date Time to open the Date Time screen and set the date/time as
required.
Note: The shift code can be configured in Service >Setup >Workshifts. This
code can then be inserted using the Date>Time elements.
Shift code
Field Name: Enter the name of the field, if required.
Note: This is referred to when linking fields.
Horizontal and vertical position: Position the field within the print area.
Font: Font to be used (arial, courier, etc.).
Font size: Size of the character in points.
Font style: Format of the font (Complete, Block, etc.).
Rotation: Rotates field (0°, 90°, 180°, 270°).
Negative printing: To print white on colour (e.g.: white on black).
Chimney-Tower print: To print field content with characters stacked one
below the other.
Visible print: To make the field printable or not printable.
Press “Accept New Values” to confirm changes and to return to the “Field”
screen.
Shift codes will be visible only once shifts are set up or updated.
To set up and update shift codes:
(1) If currently printing, deactivate the active group(s).
(2) Ensure the user type is “settings”.
(3) In the Service menu, select Set-up>Work Shifts.
(4) Enter the number of shifts to be created (max. 5).
(5) Select Save Setting.
The red alarm led will flash because the configuration has changed, however,
this alarm can be ignored as the printer will be manually rebooted later.
(6) Select Work Shifts.
To Next Page
Loading...
Need help?
General
