Doremi ShowVault - Time Zone Set Up; Checking the Time Zone; Changing the Time Zone

7 Time Zone Set Up
ShowVault units will be set to Pacific Time Zone at the factory. This section provides
information on how to check and/or change the time zone.
7.1 Checking the Time Zone
• To confirm that the time zone of the ShowVault is set correctly open a terminal window by
going to the “Menu → System → Terminal” menu of the ShowVault.
• Type: date and then press "Enter".
• The current time and time zone will be displayed.
7.2 Changing the Time Zone
• To change the time zone follow the steps below in the terminal window:
• Type: su and then press "Enter".
• Type the "root" password to login as "root" – consult the system administrator to know
the root password or Doremi to know the default root password.
• Type: /sbin/rwdo tzconfig and then press "Enter".
• Answer the questions about the different time zones.
_____________________________________________________________________________________
SHV.OM.001293.DRM Page 48 Version 1.3
Doremi Cinema LLC Confidential