• Type: ftp > prompt off // - this command turns off prompting for each individual file to
be copied
• Type: ftp > mput
*
// - this command 'puts' all files from the source directory specified
above (
dcp_package/
) into the "/data/incoming/" directory of the destination ShowVault
• When completed type bye and then press "Enter" at the command prompt to quit the
FTP session
• The ShowVault will then automatically scan the "/data/incoming/" directory and ingest
the files contained in it
10.8 Changing the Linux Login Password
• To change the ShowVault login password open a terminal window and do the following:
• Type: mount -o rw,remount / and then press "Enter"
• Type: password root and then press "Enter" (this changes the password for the login
named "root")
• Type: password and then press "Enter" (type the new password)
• Type: password and then press "Enter" (retype the new password)
• Type: sync and then press "Enter"
• Type: mount -o ro,remount /
Note: If changing the "root" password make sure to record the password in a secure place. If
the password is lost, the user will no longer be able to perform "root" privileges or have "root"
rights.
10.9 Changing the Linux Display Resolution
• To set up the ShowVault display resolution for an external VGA or front panel server
LCD screen do the following:
10.9.1 External VGA
• Type: mount -o rw,remount / and then press "Enter" - allows writing to boot flash
card
• Type: cd /etc/X11/ and then press "Enter"
• Type: cp XF86Config-4.org XF86Config-4 and then press "Enter"
• User will be prompted to overwrite the previous configuration
• Type: y and then press "Enter"
_____________________________________________________________________________________
SHV.OM.001293.DRM Page 69 Version 1.3
Doremi Cinema LLC Confidential
To Next Page
Loading...
